Electronic Outside Micrometer
● Product name: electronic outside micrometer
● Serial number: G215-03-04
● Ratchet friction thimble easy to use by one hand
● High quality material and precision machining process
● Display data is origin data of absolute
● IP54 with data output
- Product Introduction
Specification
|
ART.NO. |
ART.NO. |
RANGE |
READING |
|
G215-03-0025 |
G215-04-0025 |
0-25MM/0-1" |
0.001MM/0.00005" |
|
G215-03-0050 |
G215-04-0050 |
25-50MM/1-2" |
0.001MM/0.00005" |
|
G215-03-0075 |
G215-04-0075 |
50-75MM/2-3" |
0.001MM/0.00005" |
|
G215-03-0100 |
G215-04-0100 |
75-100MM/3-4" |
0.001MM/0.00005" |
|
G215-03-0125 |
G215-04-0125 |
100-125MM/4-5" |
0.001MM/0.00005" |
|
G215-03-0150 |
G215-04-0150 |
125-150MM/5-6" |
0.001MM/0.00005" |
|
G215-03-0175 |
G215-04-0175 |
150-175MM/6-7" |
0.001MM/0.00005" |
|
G215-03-0200 |
G215-04-0200 |
175-200MM/7-8" |
0.001MM/0.00005" |
|
NOTE: G215-03=Regular Model;G215-04=IP54 with data output |
|||
Other details
|
|
|
|
Feature
Our electronic outside micrometer comes with "Ratchet friction thimble" easy to use by 1 hand. Display data is origin data of absolute measurement after changing battery, with Carbide measuring faces, measuring range from 0-200mm to meet all your requirement, and for this model we have IP54 with data output. You can use a USB cable (you need buy it separately) to connect the electronic outside micrometer and computer together to output the data you have measured.
Since electronic outside micrometer are very precise measuring tools, so our technicians need to check the accuracy of the micrometers after assembly. We typically use standard gauge blocks to calibrate the micrometers, adjusting the position of the micro screw or replacing some parts to keep the measurement error within the allowable range. For example, by measuring a standard gauge block (such as a 10mm standard gauge block) with the micrometer, we observe whether the reading is accurate. If there is an error, we adjust it using the fine-tuning device or calibration screws.
Due to their high precision, when using a micrometer we have to be carefully, For example, when using a micrometer, do not rotate the thimble with excessive force when rotating the thimble. Too much pressure may result in measurements that are too small, while too little pressure can lead to poor contact and affect the accuracy of the measurement. In severe cases, improper handling might even damage the micrometer.
FAQ
- Portability: Micrometers are generally small in size and easy to carry. In situations that require on-site measurements, such as equipment maintenance and field operations, micrometers can be conveniently carried and used for measurements.
- Durability: High-quality micrometers are typically made of metal materials and have a sturdy structure. If properly maintained, they can last for a long time. For instance, in a factory workshop environment, micrometers can withstand a certain degree of impact and wear while still maintaining good performance.
- Reading Convenience: Digital micrometers can directly display the measured values, eliminating the need for manual reading and estimation, which reduces reading errors.
- Precision and Reliability: Digital micrometers typically offer high precision, capable of achieving accuracy to 0.001mm/0.00005", and the use of electronic sensors enhances their precision and reliability.
- Data Output: Many digital micrometers can connect with computers or other devices, enabling real-time transmission and analysis of measurement data.
- Clean the Contact Points
Before zeroing, clean the contact points (spindle and anvil) with a soft, lint-free cloth to remove any dirt or debris that might affect the zero setting.
- Touch the Points Together
Close the micrometer so that the spindle and anvil just touch each other. They should not be forced together, as this could damage the micrometer.
- Zero the Micrometer
Find the zero button on the electronic outside micrometer
Press and hold the zero button until the display shows 0.000.
Hot Tags: electronic outside micrometer, China electronic outside micrometer manufacturers, suppliers, factory, digital vernier caliper stainless steel, Digital Indicator Gauge, Vernier Caliper 0 150mm, outside micrometer 0 1, lock screw vernier caliper, digital vernier gauge
