Ip54 Digital Caliper
● Product name: ip54 digital caliper
● Serial number: G209-15
● IP54: Dustproof and waterproof
● Can perform well after the splashed water is cleaned
● Measuring surfaces ground for ultimate accuracy and smooth throughout
- Product Introduction
Specification
|
ART. NO. |
RANGE |
READING |
|
G209-15-0150 |
150MM/6" |
0.01MM/0.0005" |
|
G209-15-0200 |
200MM/8" |
0.01MM/0.0005" |
|
G209-15-0300 |
300MM/12" |
0.01MM/0.0005" |
Other details
Feature
IP54 digital caliper is design to resist some environmental factors compare with normal digital caliper . IP54 is a representation method of the protection level, where "IP" is the abbreviation of "Ingress Protection". The two number represent the level of dustproof and waterproof.
In terms of dustproof: The digit "5" in IP54 digital caliper indicates that this caliper has a certain degree of dustproof ability. Although it cannot completely prevent dust from entering, it can resist most of the dust in the daily working environment to a certain extent and prevent the dust from entering the inside of the caliper and affecting its precision and normal operation. For example, in environments such as general mechanical processing workshops and woodworking workshops, there will be a certain amount of dust such as metal chips and wood chips suspended in the air. The digital caliper can effectively reduce the possibility of these dusts entering the inside of the caliper.
In terms of waterproof: The second digit "4" of IP54 digital caliper represents that it has the ability to prevent water from splashing in. In some occasions where water may splash onto the caliper, such as in damp processing workshops or beside machine tools with coolant spraying, the digital caliper can prevent water from entering the inside of the caliper to a certain extent and avoid problems such as short circuit, corrosion or impact on measurement precision caused by the intrusion of water. For instance, in an automobile parts processing workshop, when coolant is used for cooling and lubrication, the IP54 digital caliper can better resist the splashing of the coolant.
Our factory also can supply digital caliper IP67, please contact with us for more details.
FAQ
Digital calipers need to be calibrated, reasons：
Ensuring measurement accuracy：During the long-term use of digital calipers, due to the influence of various factors, such as the wear of mechanical components, the aging of electronic elements, and changes in the usage environment (temperature, humidity, dust, etc.), their measurement accuracy may decline. Through regular calibration, these possible errors can be detected and corrected to ensure that the calipers can provide accurate measurement results. For example, the mechanical processing industry has extremely high requirements for the dimensional accuracy of parts. If there is a deviation in the accuracy of the calipers, it may lead to the processed parts not meeting the design requirements and resulting in waste products.
Meeting the requirements of quality standards: In many industries, such as manufacturing, aerospace, and the automotive industry, there are strict quality control standards and specifications. These standards usually require that measuring tools must undergo regular calibration, and the calibration process needs to comply with certain metrological standards and procedures. Using calibrated digital calipers can ensure the traceability of product quality and ensure that the production activities of enterprises comply with industry standards and regulatory requirements.
In the case of frequent use：If ip54 digital calipers are used in high-frequency usage scenarios such as on production lines and need to conduct a large number of measurement tasks every day, the calibration cycle should be relatively short. Generally, it is recommended to conduct calibration once every 1- 3months so that the problem of declining accuracy caused by frequent use can be detected in time.
In the case of occasional use: For digital calipers that are used occasionally, such as those used in small maintenance workshops or school laboratories, the calibration cycle can be appropriately extended. Calibration can be carried out approximately once every 3 - 6 months, because the usage frequency is low and the accuracy of the calipers is less affected by usage factors.
Calibration methods:
1) Zero calibration: Wipe the two measuring surfaces of the calipers clean and make them fit closely together. Observe whether the displayed value on the calipers is zero. If it is not zero, it can be reset to zero through the "ZERO" key on the calipers or the corresponding calibration function.
2) Select standard: gauge blocks that are suitable for the measurement range of the calipers. The precision of the gauge blocks should be at least one grade higher than that of the calipers.
3) Calibration using professional equipment: In some occasions where extremely high requirements for measurement accuracy are imposed, such as in the manufacturing of precision instruments and metrology laboratories, professional metrology equipment can be used to calibrate digital calipers.
Hot Tags: ip54 digital caliper, China ip54 digital caliper manufacturers, suppliers, factory, best digital calipers for machinist, Precision Digital Caliper, electronic caliper tool, digital vernier gauge, accud digital caliper, 8 inch vernier caliper
