video

Simple Vernier Caliper

● Product name: simple vernier caliper
● Serial number: 201-16-17
● 14-degree angle on vernier to reduce the possibility of parallax errors
● With special long jaw design
● With fine-adjustment

  • Product Introduction

 

 

Specification

product-542-249
Monoblock item no.:201-16-***
product-731-334
Non-Monoblock item No.: 201-17-***
product-462-218
Monoblock Non-monoblock RANGE READING A(MM) B(MM)
Stainless steel Carbon steel Stainless steel Carbon steel
201-16-0501 201-16-0501C 201-17-0501 201-17-0501C 500MM 0.02MM 100/125/150 10
201-16-0502 201-16-0502C 201-17-0502 201-17-0502C 500MM 0.05MM 100/125/150 10
201-16-0503 201-16-0503C 201-17-0503 201-17-0503C 500MM/20" 0.02MM/1/1000" 100/125/150 10
201-16-0504 201-16-0504C 201-17-0504 201-17-0504C 500MM/20" 0.05MM/1/128" 100/125/150 10
201-16-0601 201-16-0601C 201-17-0601 201-17-0601C 600MM 0.02MM 100/125/150 10
201-16-0602 201-16-0602C 201-17-0602 201-17-0602C 600MM 0.05MM 100/125/150 10
201-16-0603 201-16-0603C 201-17-0603 201-17-0603C 600MM/24" 0.02MM/1/1000" 100/125/150 10
201-16-0604 201-16-0604C 201-17-0604 201-17-0604C 600MM/24" 0.05MM/1/128" 100/125/150 10
201-16-0801 201-16-0801C 201-17-0801 201-17-0801C 800MM 0.02MM 125/150/200 20
201-16-0802 201-16-0802C 201-17-0802 201-17-0802C 800MM 0.05MM 125/150/200 20
201-16-0803 201-16-0803C 201-17-0803 201-17-0803C 800MM/32" 0.02MM/1/1000" 125/150/200 20
201-16-0804 201-16-0804C 201-17-0804 201-17-0804C 800MM/32" 0.05MM/1/128" 125/150/200 20
201-16-1001 201-16-1001C 201-17-1001 201-17-1001C 1000MM 0.02MM 125/150/200 20
201-16-1002 201-16-1002C 201-17-1002 201-17-1002C 1000MM 0.05MM 125/150/200 20
201-16-1003 201-16-1003C 201-17-1003 201-17-1003C 1000MM/40" 0.02MM/1/1000" 125/150/200 20
201-16-1004 201-16-1004C 201-17-1004 201-17-1004C 1000MM/40" 0.05MM/1/128" 125/150/200 20
201-16-1501 201-16-1501C 201-17-1501 201-17-1501C 1500MM 0.02MM 150/200/250 20
201-16-1502 201-16-1502C 201-17-1502 201-17-1502C 1500MM 0.05MM 150/200/250 20
201-16-1503 201-16-1503C 201-17-1503 201-17-1503C 1500MM/60" 0.02MM/1/1000" 150/200/250 20
201-16-1504 201-16-1504C 201-17-1504 201-17-1504C 1500MM/60" 0.05MM/1/128" 150/200/250 20
201-16-2001 201-16-2001C 201-17-2001 201-17-2001C 2000MM 0.02MM 150/200/250 20
201-16-2002 201-16-2002C 201-17-2002 201-17-2002C 2000MM 0.05MM 150/200/250 20
201-16-2003 201-16-2003C 201-17-2003 201-17-2003C 2000MM/80" 0.02MM/1/1000" 150/200/250 20
201-16-2004 201-16-2004C 201-17-2004 201-17-2004C 2000MM/80" 0.05MM/1/128" 150/200/250 20
201-16-3001 201-16-3001C 201-17-3001 201-17-3001C 3000MM 0.02MM 200/250/300 20
201-16-3002 201-16-3002C 201-17-3002 201-17-3002C 3000MM 0.05MM 200/250/300 20
201-16-3003 201-16-3003C 201-17-3003 201-17-3003C 3000MM/120" 0.02MM/1/1000" 200/250/300 20
201-16-3004 201-16-3004C 201-17-3004 201-17-3004C 3000MM/120" 0.05MM/1/128" 200/250/300 20

 

Other details

vernier caliper 0 600mm
600mm caliper
caliper 600mm

Feature

 

Simple vernier caliper is without upper jaws compare with normal caliper, we also supply normal type. The one-way jaw vernier caliper is a special type of vernier caliper. It has only an internal jaw without upper jaws. Compared with ordinary vernier calipers, its structure is simpler and its weight is lighter. The simple vernier caliper is mainly used for specific measurement needs. For beginners or users who only need to measure simple internal dimensions and lengths, it is more convenient to use.

It has two types, mono block and non-mono block(open type):

product-436-206
product-369-192

Difference of open type and mono block type

 

1.Open type: the measuring surface and cursor can be repaired, so the service life is longer

and production time is faster.

 

2.Mono block type: with good stability, the vernier will not move, and the reading is more accurate.

Without screws to fix, so it is more beautiful in appearance. However, this difference does not affect their basic function and measurement accuracy. So when choosing, it can be decided according to personal preference.

 

FAQ

1. What do I need to pay attention to when using calipers?

The vernier caliper is a precision measuring tool that needs to be careful when using it. To avoid collision or dropping to the ground. Don't measure rough objects to prevent damage to the measuring surface. It should also be kept away from sharp objects to prevent scratches on the surface. When you don't use it, it should be kept in a dry and clean place, away from acidic or alkaline substances to prevent rust. If not use it for a long time, It is better to coat the caliper with anti-rust oil.

2. How do you know if a simple vernier caliper is bad?
  1. Appearance: Carefully observe the scales on the main scale and the vernier. If the scales are blurred and some of them have been worn off, it will lead to inaccurate readings.
  2. Jaws: Check the shape and surface condition of the inner and outer jaws. The jaws should be flat and sharp. If the jaws can't fit the surface of the measured object , then will affect the measurement accuracy.
  3. Accuracy: Standard gauge blocks can be used to check the accuracy of the caliper. A standard gauge block is a high-precision measuring tool. Read the value of the caliper and compare it with the value of the standard gauge block.
  4. Mobility: Push the vernier caliper to feel whether its movement is smooth. If the movement is not smooth, then it will affect the accuracy of measurement.
  5. Zeroing: Close the jaws and observe whether the zero scale line on the vernier is aligned with the zero scale line on the main ruler.

Hot Tags: simple vernier caliper, China simple vernier caliper manufacturers, suppliers, factory, vernier caliper steel, student grade vernier calipers, foolproof vernier calipers, engraved logo vernier calipers, depth vernier calipers, caliper 500mm

Send Inquiry

(0/10)

clearall